Home page -> Зарядные устройства

pages in this folder

Зарядные устройства Зарядные устройства RT UltiPower Chargers ЗУ "Находка"

Эта страница на русском | Printable version

UltiPower chargers

Great features of UltiPower chargers

UltiPower design and manufacture switch mode  battery chargers with output of 6, 12, 24, 36 & 48 60,72,96 volts and input of 115VAC  and 230VAC .  UltiPower chargers can also apply patented reverse pulse technology to revolutionize battery charge approache  and maintenance.

UltiPower, as a high-tech and software enterprise ,which has successfully developped various  high-end embeded ECU for industries like automotive, marine, heavy industry and many others,  integrated advanced hardware technology  like switch mode and rectifier bridge design with sophisticated charge algorithm software.  Making UltiPower charger so called next generation charger by our customers  from all over the world.

UltiPower use Ｓelected components commonly found in computers and are utilized in these constant current chargers to reduce size and weight normally associated with familiar taper type chargers. One such component is a sophisticated switching circuit that "chops up" 115/230VAC input at a rate of 100,000 pulses per second. Since less power is being manipulated at a faster rate, the conversion to6, 12, 24, 36 & 48 60VDC can be completed without the need for a large transformer.

Benefits of  UltiPower Switch-mode Chargers:

1.Full digital display to know the real charge process and how hard UltiPower charger is working for you.  Charge voltage,current and working temperature is displayed.

2.Patented reverse pulse technology to revive battery during the charge process. Unlike conventional charger using only simple charge  control, UltiPower chargers apply reverse pulse technology to  reduce battery internal impedance. Charge control based on MCU,which continuously monitor battery status and give instructions to adjust charge data, avoiding gassing and battery temperature raise.

3.  Smaller size and light weight 

4.  No tapering of current - Constant Current

In the conventional chargers, the current reduces as the battery voltage goes up. For example an 8 Amp charger, the current will start at 8 Amp and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 4 Amps.The switch-mode charger gives a constant current. In charging time, the constant current is equal to twice the tapered current. So a 4 Amp Constant Current battery charger is as fast (in some cases faster) than a tapered 8 Amp conventional charger.

Some conventional chargers are constant current types but these are more expensive, larger in size and weight.

3. More Reliable:

In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.

4. Ability to function with AC voltage fluctuations

The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power. For example a properly designed switch-mode charger of 115VAC input will operate at 90VAC. So 115VAC chargers can be used in Japan where the voltage is 100VAC.

5. Other benefits:

KEY FEATURES

These are function of the design of the charger.

• Deep discharge start - Low voltage start
• Intelligent  Current control: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery.
• Voltage limit
• On-board application: Due to small size, the switch-mode chargers can be installed on-board a scooter or power chair.
• Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with it and charge the battery at lunch hour or during a visit.
• Universal input: Any voltage from 90VAC to 264VAC (without any switch). This means you only need one charger for the whole world.
• Short circuit protection: If you touch the output +Ve & -Ve wires (with AC ON) and there will be no failure (no fuse will blow).
• Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally.
• No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery.
• De-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (phsical internal damaged battery can not  be reversed).
• Maintain full charge & no overcharging: UltiPower charger can be left connected to the battery indefinitely without harming (overcharging) the battery.
• One charger for any type of lead acid battery (no switch): UltiPower charger will charge any type or brand of lead acid battery fully - Gel, sealed or dry battery.

Покупка зарядных устройств

Вы можете купить это и другие зарядные устройства для заряда свинцово-кислотных аккумуляторных батарей для включения в состав системы автономного или резервного электроснабжения вашего дома в нашем интернет-магазине.

При выборе правильного зарядного тока ЗУ, вам необходимо также правильно определить требуемую для надежного электропитания емкость аккумуляторной батареи.

Пожалуйста перейдите в раздел "Зарядные устройства" нашего интернет-магазина для выбора ЗУ и совершения покупки.

В Интернет-магазине представлены не все варианты ЗУ. Пожалуйста, сделайте заказ по телефону или электронной почте, если вам нужно ЗУ с другими параметрами.

:: menu

:: Search

:: TEXT_ICQ

379315905

:: banners

Текущие посетители