Outback Power Systems VFX Series Ventilated Inverters

Outback Power Systems VFX2612E 2.6 kWAC 12 VDC
VFX2812 2.8 kWAC 12 VDC
VFX3024E 3.0 kWAC 24 VDC
VFX3048E 3.0 kWAC 48 VDC
VFX3524 3.5 kWAC 24 VDC
VFX3648 3.6 kWAC 48 VDC

Pure sinewave. European voltage. VFX Series Ventilated Inverters

Vented Construction Features:

Powdercoated all aluminum die-cast chassis
Internal electronic components are cooled by outside air
Stainless steel screen to protect air intake and internal fan
UL 94V0 plastic vent grills to protect the air exhaust. All openings are 0.0025 inches square to keep out dirt, bugs, and other critters – we call it “bug proof” construction
Air inlet comes with removable, washable foam filter insert to trap small particles
Conformal coated circuit boards to resist corrosion
Higher output power when inverting or battery charging when compared with the sealed FX inverter versions
Designed to allow easy field servicing and repair

Ideal Applications:

Areas where salt air is not a problem and climate is dry
More watts per dollar
Installations where well protected environments are available

The new OutBack VFX series is a ventilated version of original sealed FX series modular "building block” sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series. Each OutBack FX or VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. VFX Series Vented Inverters

The OutBack VFX series is also available in export versions (E)with 230 VAC, 50 hz output that can be connected in parallel (230 VAC) or in three phase (230Y400 VAC) configurations. Like the FX series, the OutBack VFX is also designed to survive harsh environments around the world. The full sreened vent openings are "bug-proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The VFX can be used in high ambient applications up to 60oC (with reduced output ratings). The OutBack VFX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PSDC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display.

Specifications	VFX2612E*	VFX 2812	VFX 3024E*	VFX 3048E*	VFX 3524	VFX 3648
Continuous Power Rating at 25 degrees C	2600VA	2800VA	3000VA	3000VA	3500VA	3600VA
Nominal DC Input Voltage	12	12	24	48	24	48
Nominal AC Input Voltage / Frequency	230V/50Hz	120V/60Hz	230V/50Hz	230V/50Hz	120V/60Hz	120V/60Hz
Continuous AC RMS Output current at 25 C	11.3 amps	23.3 amps	13 amps	13 amps	29.2 amps	30 amps
Idle Power (typical at no AC load) (sleep – 3 watts)	18-20 Watts	19-21 Watts	18-20 Watts	21-23 Watts	18-20 Watts	21-23 Watts
Efficiency (typical at 25 degree C and 75% resistive load)	89%	>90%	>90%	>90%	>90%	>90%
Total Harmonic distortion voltage (typical / max)	2% / 5%	2% / 5%	2% / 5%	2% / 5%	2% / 5%	2% / 5%
Output Voltage Regulation	+/- 2% typ	+/- 2% typ	+/- 2% typ	+/- 2% typ	+/- 2% typ	+/- 2% typ
Surge Power Capability Peak (1mSec)	35 amps AC	70 amps AC	35 amps AC	35 amps AC	70 amps AC	70 amps AC
Surge Power Capability RMS (100mSec)	20 amps AC	50 amps AC	25 amps AC	25 amps AC	50 amps AC	50 amps AC
Overload Capability (from 25 C start) 5second	4000 VA	4800VA	4800 VA	4800 VA	5000VA	5000VA
Overload Capability (from 25 C start) 30 minutes	3100 VA	3200VA	3300 VA	3300 VA	4000VA	4000VA
Automatic AC transfer Relay (at nominal AC)	30 amps AC	60 amps AC	30 amps AC	30 amps AC	60 amps AC	60 amps AC
AC Input Current (adjustable limits)	30 amps AC	60 amps max	30 amps max	30 amps max	60 amps max	60 amps max
AC Input Voltage Range (adjustable limits)	200-260 VAC	90-140VAC	200-260 VAC	200-260 VAC	90-140VAC	90-140VAC
Frequency Range – AC Input	40 to 60 Hz	54-67.4 Hz	40 to 60 Hz	40 to 60 Hz	54-67.4 Hz	54-67.4 Hz
DC Input Range (adjustable low battery cut-out)	10 – 16.5 VDC	10-16 VDC	20-33 VDC	40-66 VDC	20-33 VDC	40-66 VDC
Recommended DC Breaker	OBDC-250	OBDC-250	OBDC-250	OBDC-175	OBDC-250	OBDC-175
Continuous Battery Charger Output amps DC	125 amps	125	85 amps	45 amps	85	45
Shipping Weight	62 Lbs	62 Lbs	62 Lbs	62 Lbs	62 Lbs	62 Lbs

*Note: In Russia we sell Export units, with an "E" suffix, which produce 230VAC @ 50Hz.

Inverters in our internet shop

You can buy this and other inverters and UPS for your backup or stand-by power syste in our internet shop.

To configure your system properly, you should determine necessary capacity of the storage batteries. .

Please go to our Internet-shop, section "Power electronics" to select the best inverter for your power system.

Outback Power Systems VFX Series Ventilated Inverters

Vented Construction Features:

Ideal Applications:

Inverters in our internet shop

:: menu

:: information

:: Search

:: TEXT_ICQ

:: banners