Inerter StecaGrid 2000+

Photovoltaic modules generate power from solar energy in an environmentally-friendly manner. The basis for the development of the StecaGrid 2000+ inverters was to allow this solar energy to be flexibly used in a versatile manner and feed it into the public grid.

The StecaGrid 2000+ is perfectly suited to solar systems from 2,000 W upwards. Systems between 2,000 W and6,000 W are implemented with a single device, systemsabove 6,000 W can be implemented using several devicesin a master-slave combination.

The StecaGrid 2000+ uses the MultiString concept. Everyinverter has two inputs. One module string can be con-nected to each input. Several combinations of strings andinverters are connected to the public grid. The advantageof such a system is the low sensitivity to negative influ-ences such as (e.g.) partial shadowing, functional faults,or the dropout of a string. The use of several decentra-lized master-slave combinations reduces the cost of DCcabling and minimizes electrical losses.

Features:

MultiString concept (2 MPP-Tracker per device)
Flexible and expandable
Master-Slave concept
Suitable for outdoor installation (IP 65)
Efficiency of up to 95.0 %
Informative display
Low weight
Simple installation
Integrated Data logger

Technical data

	StecaGrid 2000+ D StecaGrid 2000+ Master	StecaGrid 2000+ Slave
Input (PV-side)
Input voltage operating range	80 V to 450 V
MPPT-range	80 V to 400 V
Max. startup input voltage	410 V
Max. dc input power	1075 W [per input] or 2150 W [2 inputs in parallel]
Max. Input curren	2 x 8 A [current limited by inverter] oder 1 x 16 A [parallel connected input]
DC connectors	Multi-Contact MC 4 (Solarline 2)
Output (Grid-side)
Nominal output voltage	2,000 Вт
Mains voltage	190 - 265 В (на выбор)
Grid type	L/N+PE, single phase
Mains frequency	47.5 bis 52 Hz [depending on country selection]
Max. efficiency	95,0 %
European efficiency	93.3 %	93,5 %
Power derating at full load	beginning at 40 °C (Tamp.)
Self consumption of the inverter(Night operation)	1.3 W (with MSD)1.0 W (without MSD)	0 Вт
AC connectors	WAGO 2.5 - 6 mm2	-
General
Galvanic separation	HF-Transformer with galvanic seperation
Dimensions (h x d* x w) * incl. wale mounting bracket	542 х 140* х 351 mm	535 х 140* х 226 mm
Weight	11 kg	9 kg
Ambient temperature domain	-25 °C to +60 °C
Enclosure type	IP 65
Humidity	от 0 % to 95%
Noise level	< 32 dBA
Norms and certifications
Certification	CE
Others
Visualisation	Display, LED	via Master

Flexible and versatile:

The modular concept allows you to quikkly and easily mount a solar system thatsuits your needs. One StecaGrid Mastercan be interconnected with two furtherStecaGrid Slaves. This allows a singledevice to cover an output range from2,000 W to 6,000 W. Addition of furtherinverters allows solar systems of several10,000 W to be implemented.

Adaptable

Whether a small house, a large apartment building, a farm or a freestandingsystem, the StecaGrid inverters can beused in a wide range of applications.

Покупка инверторов и ББП

Вы можете купить этот и другие инверторы и ББП для включения в состав системы автономного или резервного электроснабжения в нашем интернет-магазине.

При конфигурировании системы бесперебойного электроснабжения перед покупкой инвертора, необходимо также определить требуемую для надежного электропитания емкость аккумуляторной батареи.

Пожалуйста перейдите в раздел "Силовая электроника" нашего интернет-магазина для выбора инвертора и совершения покупки.

Вы можете посмотреть модельный ряд инверторов в нашем Интернет-магазине. Там же вы можете узнать о технических характеристиках конкретных моделей инверторов. Пожалуйста, перейдите по ссылкам ниже для выборки продукции указанных производителей

Inerter StecaGrid 2000+

Technical data

Покупка инверторов и ББП

:: menu

:: information

:: Search

:: TEXT_ICQ

:: banners